USFS-7235-SH Wash and Dry Shower Toilet

(1 customer review)


True contemporary elegance and excellence in design. This is an exquisite combination pairing of our USSO-7235 electronic bidet seat with a pure white standard height floor standing back to the wall toilet bowl. True contemporary elegance and excellence in design. Absolutely stunning!

Delivered in 2~7 working days from receipt of order dependent on your location, There is delivery charge of £52.80 in the UK. There will be an additional charge to mainland Europe and for areas in the U.K. considered “Remote” by our courier dependent on location.

Installation Requirements

  • Connection piping to the sewerage waste system.
  • A concealed water cistern of your choosing.
  • The seat requires a mains water supply of between 0.07 Mpa (0.7 bar) and 0.74 Mpa (7.4 bar) pressure. The inlet for the seat water supply is on the left facing the toilet pan.
  • A fully compliant power source to the seat (in U.K. to BS7671) and located within 1.5m of centre line of toilet (240V 50Hz 1.7Kw max) suggest located on the right facing pan.
  • Before Installing, if you have any doubts or require further technical information please call us on 0800 6891269.
SKU: 00012 Category:

General Specification

Key Features
  • Made from germ-resistant plastic for maximum hygiene.
  • Posterior cleansing with a variable spray.
  • Feminine cleansing.
  • Variable spray (5 settings).
  • Adjustable wands position.
  • Aerated water spray.
  • Kids function.
  • “IIP” (Intensive Impulse Pulsation) function.
  • “Auto” function (hygiene + dryer).
  • Jet type: continuous or with a variable flow for better cleansing action.
  • Warm water with variable temperature setting (3 levels).
  • Heated seat with variable temperature setting (3 levels).
  • Warm air dryer with variable temperature setting (5 levels).
  • Deodorizer.
  • Continuous water heating.
  • Intelligent energy saving function.
  • Controls mounted on the side of the seat.
  • Automatic cleaning of the wands before and after each use.
  • Soft closing seat and lid.
  • Touch activated on/off sensor to prevent over spray.
  • Self diagnosis.
  • Easy installation on existing toilets; Adaptable to most standard fixtures.
  • Colour: Pure white.
Heated seat
  • Heated Seat: Temperature Adjustable (3 levels) / 34 °C – 40 °C.
  • Safety Device: Temp Fuse.
  • Power Consumption: 55 ~ 65 W.
Warm air dryer
  • Safety devices: Temp Fuse.
  • Power Consumption: 280 ~ 333 W.
  • Dryer temperature adjustment (3 levels).
  • 2 years manufacturers warranty.
Power rating and energy consumption
  • Power rating: AC 230 V, 50 Hz.
  • Energy consumption: 1660 – 1975 W.
  • Electrical Safety Protection: 15 mA – GFCI.
  • Degree of Protection: IP 24.
  • Power cord length: 1.5 m.
  • Intelligent energy saving function.
  • Potable Water: Pressure 0.8 ~ 7.4 Bar / Atm.
  • Water temperature: Adjustable (3 levels) / 34 °C – 40 °C.
  • Water Jet Flow: Adjustable (5 levels – max 750 ml/min).
  • Safety Device: Temp Fuse, Thermal switch, Floating switch.
  • Power Consumption: 1600 ~ 1905 W.
  • Automatic start: deodoriser starts automatically when seat is occupied.
International Certification
  • CE, EMC, JET, Dentori, K, ISO9001.

1 review for USFS-7235-SH Wash and Dry Shower Toilet

  1. Harold Bergoff

    We had problems finding a unit for a small closet but this one fits well. It was easy to install too.

Add a review

Your email address will not be published. Required fields are marked *